Mighty Paw Smart Bell 2.0, Dog Potty Communication Doorbell
All of the mounting hardware for the Smart Bell is included in the small rectangular box in which the bell is packaged for shipment. Attaching the activator was made simple by using the 3M strips that were given, although drywall anchors and screws are also provided.
It takes only a few minutes to get your new dog doorbell up and running. Simply attach the activator and plug in the receiver. Because we are in the process of relocating (more on that later), we opted to mount ours directly onto the glass of our sliding door, where we believed it would be easier to remove when the time came.
It is recommended that the button be placed approximately 20 inches above the ground (depending on your dog’s height, of course), but we chose to place ours slightly higher because we wanted Charlie to use his nose, rather than his paw, to press the button. This is due to the fact that he is an expert at “target,” and we felt it could be easily adapted to this particular case as well. Plus, he doesn’t require any additional motivation to give paw – which he does on a consistent basis!
After that, we connected the receiver, which was several rooms away, and, to our delight, the system functioned properly right away! Seriously, what technological product does not require some amount of time-consuming troubleshooting?!
While we adored the concept of the Smart Bell, we were a little concerned about whether or not we would be able to persuade Charlie to actually utilize it.
As it turns out, teaching your dog to utilize a dog doorbell was more easier than I had thought, and Mighty Paw includes some excellent recommendations on an instructional booklet that comes with the product.
Description
As an Amazon Associate We earn from qualifying purchases. Amazon and the Amazon logo are trademarks of Amazon.com, Inc, or its affiliates.
Mighty Paw smart bell 2.0, dog potty communication doorbell is a wireless canine doorbell that is activated with a slight touch. Allowing your dog to easily notify you when it is time to go to the bathroom.
The Smart Bell is made up of two parts: an activator and a receiver, which are connected together.
The activator is the “button” that your dog will press, and it should be positioned near the door. That you use to let your dogs out on a regular basis. Only a 3M strip is required for “installation,” . There is no need for electricity to run this component. Because the button is relatively simple to operate, it is excellent for dogs of all sizes to use. When placing your order, you will be given the option of including one or two of these components with your order. A second one may be useful for larger homes with many exits. Or one can be placed on the outside of your home so that your dog can signal. When they want to come back in by wagging their tail.
A tone will be heard from the receiver every time the button is touched on the remote control. This component can be plugged into a normal socket and has a range of up to 1,000 feet from the activator! It is possible to visually see when the switch has been activated in addition to hearing. When it has been activated since a light is located beneath the recessed area above.
One other feature you’ll notice is two buttons on the side of the receiver. One to alter the volume and another to adjust the chime tone.
The Features
There are no “Strings” Attached: You won’t need any wires or batteries because the bell can be quickly installed. On your door or wall using a 3M adhesive strip – no tools are required!
Simple to operate: The bell rings with only.75 pounds of pressure, making it simple to operate for dogs of any size.
With 4 different bell volumes and 38 distinct ring tones to pick from. You can personalize the sound of the bells and the ring tone to suit your preferences. When communicating indoors. The distance between the activator and the receiver can be as much as 1000 feet.
The product is water-resistant and may be used both indoors and out.
Mighty Paw is a family-owned and operated business based in Rochester, New York. That was founded in the United States. We stand by the quality of our items! Are you dissatisfied with your purchase? Return it to us within 90 days and you will receive a complete refund of your money! Pieces that aren’t included: To purchase more Receivers + Activators, go for the Amazon ASIN: B07GJ6FTK6.
This product should only be used under the supervision of a trained professional. Children should not be allowed to play with this product. If the product is damaged, do not use it. Neither Mighty Paw nor any of its affiliates can be held liable for any harm (physical or mental). Resulting from the usage (or incorrect use) of this product under any circumstances. Caution: Chocking Hazard (small parts). Children under the age of three are not permitted.
As an Amazon Associate We earn from qualifying purchases. Amazon and the Amazon logo are trademarks of Amazon.com, Inc, or its affiliates.
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.